|
 |
| COLLECTOR CHARACTERISTICS |
LIMPIA C24 |
| Absorptive Sheet & Surface Covering |
Selective Covered Copper Band 0,12 mm |
| Manifold & Absorber Pipe Material |
Copper |
| Welding Type of Absorptive Sheet & Absorber Pipe |
Ultrasonic |
| Surface Veil |
Low-Ironed Tempered Glass |
| Base & Colleteral Lagging |
Rock-Wool & Airconditioning Wlate |
Leakproofing
|
Epdm & Silicon |
| Dimensions |
1991*1221*92 mm |
| Manifold & Absorber Pipe Total |
2 & 10 Pieces |
| Manifold & Absorber Pipe’s Diameter |
Ø 18,0 & Ø 8,0 mm |
| Flow |
120 lt/h |
| Test & Maximum Working Pressure |
20 bar & 10 bar |
| Case |
Electrostatic Painted Aluminium |
| Base Wlate |
Embossed Aluminium |
|
 |
| COLLECTOR CHARACTERISTICS |
LIMPIA C20 |
| Absorptive Sheet & Surface Covering |
Selective Covered Copper Band 0,12 mm |
| Manifold & Absorber Pipe Material |
Copper |
| Welding Type of Absorptive Sheet & Absorber Pipe |
Ultrasonic |
| Surface Veil |
Low-Ironed Tempered Glass |
| Base & Colleteral Lagging |
Rock-Wool & Airconditioning Wlate |
Leakproofing
|
Epdm & Silicon |
| Dimensions |
1991*1044*92 mm |
| Manifold & Absorber Pipe Total |
2 & 9 Pieces |
| Manifold & Absorber Pipe’s Diameter |
Ø 18,0 & Ø 8,0 mm |
| Flow |
102 lt/h |
| Test & Maximum Working Pressure |
20 bar & 10 bar |
| Case |
Electrostatic Painted Aluminium |
| Base Wlate |
Embossed Aluminium |
|
 |
| COLLECTOR CHARACTERISTICS |
LIMPIA C20 |
| Absorptive Sheet & Surface Covering |
Selective Covered Copper Band 0,12 mm |
| Manifold & Absorber Pipe Material |
Copper |
| Welding Type of Absorptive Sheet & Absorber Pipe |
Ultrasonic |
| Surface Veil |
Low-Ironed Tempered Glass |
| Base & Colleteral Lagging |
Rock-Wool & Airconditioning Wlate |
Leakproofing
|
Epdm & Silicon |
| Dimensions |
1930*930*92 mm |
| Manifold & Absorber Pipe Total |
2 & 8 Pieces |
| Manifold & Absorber Pipe’s Diameter |
Ø 18,0 & Ø 8,0 mm |
| Flow |
88 lt/h |
| Test & Maximum Working Pressure |
20 bar & 10 bar |
| Case |
Electrostatic Painted Aluminium |
| Base Wlate |
Embossed Aluminium |
Solar Glass : Low ironed tempered prismatic designed glass, minimizes the reflection of sun-ray, and
maximizes sun-ray lead in, the collector. Through this, increases the collector efficiency. Prismatic designed
glass, is manufactured at best facility and has one of the best performance collector glass in Europe.
|
| Absorber Sheet : The selective absorptive surface from; titanium nitrite-oxyde covered copper, is
used at LIMPIA collectors, minimize the reflective loss which decreases the efficiency, and transfers
the maximum ratio of radiaton heat from sun, to the plate. |
| Chasis Profile : The chasis, used in LIMPIA collectors, is specially designed and patented. |
| Glass Gasket : At LIMPIA collectors, for preventing water-enter, inside of the collector because of
rain or snow reasons, UV-resistant Epdm gaskets are used as glass holder gasket. For the leakage
possibility at the corners, glass gaskets provide complete leakproofing. |
| Manifold Gasket : At LIMPIA collectors, for preventing water-enter, inside of the collector because of rain
or snow reasons, UV-resistant Epdm gaskets are used as glass holder gasket. For the heat differences
possibility at manifold, Epdm gaskets provide complete resistant. |
| Isolation : At LIMPIA solar collectors, high heat insulated and high density 50 mm thickness rock-wool is
used. And at the borders of chasis, 20 mm climate panel is used. |
| Lower Cover : At LIMPIA solar collectors; resistant to external factors and 0,40 mm thickness; hardened,
embossed, aluminum sheet is used. Aluminum sheet provides highest resistant according to external factors,
like; transportation, installation, wind, snow, rain and temperature. |
| Ultrasonic Welding Technology : At LIMPIA solar collectors, for integrating of surface absorber and
conveyor pipes, ultrasonic welding technology are being used. |
|
|
